Bucket Trucks and Digger Derricks
Are you looking for hard-to-find parts for older trucks, even Hi-Rangers built in the 1960’s – 1990’s? Utility Equipment Parts has what you need to keep your boom or digger derrick truck operating smoothly–whether it is a manual or critical part (bucket liner, nylaflow tubing, etc.) or an accessory to make life easier and safer such as outrigger pads or covers!
The UEP Guys offer utility truck parts and accessories from many well-known utility truck manufacturers. Browse the information below to see some of our bucket truck parts and accessories. Call us if you need something else, we can probably get it!
Manufacturers We Support
Altec • DICA • Elliott Crane • Hi-Ranger • Holan • Lift All • Reach All • Stelco • Teco • Terex Telelect • Versalift
Are you a first time visitor to Utility Equipment Parts? Do you want to learn more about us before you order? Read about:
Bucket Truck Bucket Liners/Inserts
Bucket liners/inserts provide insulation from electricity. If you are operating your bucket truck near electric lines, you’ll need a bucket liner/insert as your platform/bucket alone does not protect your from electric current. OEM and after-market liners last are made with the highest quality polyethylene.
Utility Equipment Parts after-market liners are:
- Tested and guaranteed with paper certificate for 1 year at 50kV or 70kV
- Meet the ANSI 92.2 specification for electrical protection
When electrocution is the main hazard a utility worker faces, a bucket liner is vital. Polyethylene plastic liners inserted into aerial lift buckets provide greater electrical insulation for your operators and improved bucket protection. Polyethylene plastic is also highly resistant to impact damage. Polyethylene plastic maintains resistance in sub-zero temperatures as low as -130 F. Even if the operator must work through a harsh winter, they will get a measure of comfort knowing they’re protected. Plus, the liners weigh less when made from Polyethylene plastic.
Top Safety and Quality Assurances for These Bucket Liners
The American National Standards Institute (ANSI) requires a bucket liner to be tested and certified before it is approved for use in the field. In accordance to ANSI standard A92.2, Each liner is required to be retested annually to ensure quality. The bucket liner is certified when tested at 50kV or 70kV AC. When you receive your bucket liner, you can be assured the liner is proven and capable of protecting bucket truck operators.
Bucket liners save lives. Utility Equipment Parts offers all sizes of liners for every sort of aerial lift used by utility workers. With Utility Equipment Parts you can get bucket liners for all the leading name brands: Altec, Hi-Ranger, Teco, Holan, Lift-All, Reach All, and Versalift. Check out our selection of bucket covers and accessories to fully equip your bucket truck. Ensure you’re insulated and protected when working around electric lines.
Augers & Auger Tooling
UEP offers the best digger derrick parts available in the industry, which is why we carry Pengo, Terex, and Frost Auger Tooling augers and auger replacement parts
Pengo, Terex and Frost augers use the highest quality materials available for lasting durability and strength. Depending on your unique needs, we offer a full-range of dirt augers and rock augers, including auger parts and auger teeth. For tougher jobs going through rock, we carry carbide teeth.
Pengo augers are designed with a Triflow pilot bit for increased durability and better drilling stability, so you won’t have to worry about replacing your auger anytime soon. Investing in the industry’s best augers and auger tooling means you can improve efficiency and provide superior results at an affordable price.
If there is a product you do not see listed on our website, give us a call. We will get you augers and auger tooling and components you are looking for. Experience the Utility Equipment Parts service difference with your next auger order!
UEP offers a variety of bucket truck manuals. We carry complete manuals that include:
- Service & maintenance manuals
- Bucket truck parts manuals
- Bucket truck operations manuals
- Bucket truck repair manuals
- Digger derrick and crane manuals
We offer complete Hi-Ranger manuals, Altec manuals, Teco manuals, Holan manuals, Reach All manuals, Lift-All manuals, Telsta manuals, Telelect manuals, Elliott Crane manuals, and more. To get the correct manual for your unit, all we need is your unit’s model and serial number.
Double Esterlon/Double-Braided Polyester Fiber Winch Ropes
UEP offers winch ropes, and has a wide selection of high-quality, abrasion-resistant ropes for the utility industry.
The Double Esterlon/Polyester Double-Braided winch rope is designed for Digger Derricks and Material Handlers. It is constructed of high tenacity 1W81 polyester fiber which has a unique cordage finish and is completely splice-able. Double Esterlon has an average strength of 9.2 grams per denier and extraordinary lubricity, making it the highest strength double-braid polyester available. Double Esterlon Polyester Double-Braided winch ropes have an excellent combination of high strength and low stretch, giving it outstanding wear life even when the load is excessive.
We offer many sizes of winch ropes, from ¼” up to 2” diameter, any length. Your rope can be customized to your needs, with a variety of Crosby hooks or just a standard eye on each end.
And, our ropes are available coated with optional Maxijacket (MJ) – a urethane coating that further enhances the rope’s wear resistance.
Winch Rope Features:
- High strength/low stretch
- Excellent wear life
- Dielectric strength
- Completely spliceable
- Urethane coating available for enhanced wear resistance
If your reel can’t handle more than 1″ to 1-1/2″ diameter composite winch ropes, UEP has Dyneema/UHMWPE or Ultra High Molecular Weight Polyethelyne ropes available. Dyneema brand UHMWPE ropes are EIGHT TIMES STRONGER than steel ropes.
Use Dyneema/UHMWPE Ropes For:
- Lifting and towing very heavy vehicles and vessels
- Heavy lifting with cranes and pulley systems
- Wire rope replacement – stronger and more affordable
- Anchor ropes
Tiiger Pole Pullers and Accessories
UEP offers a variety of bucket truck parts and accessories including Tiiger products – simple to operate, lightweight, and made of the highest quality materials. Tiiger utility equipment is ergonomically designed for ultimate comfort, long-lasting durability, and maximum safety. The easy-to-maneuver Tiiger pole pullers, load dock, and dolly have been engineered and manufactured with specific utility applications in mind. Tiiger products are made by a lineman for linemen, ensuring they provide the highest level of functionality, safety, and convenience when used in the field.
Tiiger Equipment Features:
- Simple to operate
- Ergonomically designed – easy to maneuver
- Long-lasting durability – maximum safety
Tiiger Pole Pullers
Tiiger Pole Pullers offer safe, quick, and economical removal of utility poles. The individual components are easily assembled at the pole removal site. They include the hydraulic cylinder, swivel assembly, base plate, and pole puller pad. The pad is constructed of strong yet flexible high density polyethylene that supports and prevents the base plate from sinking into soft soil. The base plate is lightweight yet constructed with high yield-strength steel. It is designed with the unique round centering bar for proper placement of the cylinder and uniform distribution of the downward load. Properly positioned within the four bushings on the pad, the base is prevented from pushing away from the pole. The combination of the pad and base plate provides the lowest possible center of gravity and minimizes the potential for the cylinder to tip.
A pole can be cut only 14 inches above ground and still allow the use of the Tiiger Pole Puller. The heart of the system is the lightweight hydraulic cylinder with a lift capacity exceeding 50,000 pounds. Weighing in at only 57 pounds, it still provides a lifting capacity greater than or equal to other pole pullers. The Tiiger Pole Puller requires only a low pressure hydraulic supply limited to a maximum of 2800 PSI. The cylinder is manufactured with high-strength steel tubing with the hard chrome plated piston rod. Two handles make for an ergonomic design resulting in low handling stress for the operator. A 16-inch stroke means two to three lifts per pole removal.
The Tiiger Cube is a compact gas-powered single stage hydraulic pump designed for use in remote or confined spaces. The Tiiger Cube is specially designed for the Tiiger Pole Puller and is simple to operate. Set the on-off switch to on and open the fuel line switch, set the choke and throttle, pull the recoil starter and off you go! The Tiiger Cube is equipped with 10-inch all-terrain tires providing ease of mobility.
Tiiger Pole Dolly
The Tiiger Pole Dolly allows the pole to be easily moved by two people — one person steering the dolly and the second holding and guiding one end of the pole. Lifting a 45-foot pole and placing it on Tiiger Pole Dolly and then moving it in any direction is accomplished by positioning the pole in the roller cradle at the balance point of the pole. Its unique feature of 180 degree steering allows complete mobility. The dolly is maneuverable in confined spaces, being only 32 inches wide and constructed with high-yield strength steel. The pole dolly is equipped with large turf-friendly tires mounted on hubs complete with sealed roller bearings. The axles incorporate machined kingpins with bronze bushings and are equipped with grease fittings. There are three steering positions — front, left or right side. The pole roller cradle is constructed with high strength steel and equipped with high molecular weight polyethylene rollers.
UEP offers a variety of bucket truck parts and offers far more utility trailer accessories and components than are listed on our website.
The Sliding Stanchion provides a convenient way to position poles. Each stanchion is equipped with an over-center, variable tension, cam-lock assembly that locks into position using its large handle lever, and is completely adjustable to fit various sizes of channel type or I-beam bolsters.
Sliding Stanchion Features:
- Cast iron alloy steel
- Cam-lock assembly
- Completely adjustable
- Height 21”
- Weight 32 lbs
The Collapsible Reel is used to take up wire or small diameter cable. The design allows the wire to be wound onto the reel and then removed in a neat coil by turning the handle which collapses the outer rim of the pick-up reel.
Collapsible Reel Features:
- Wire/cable capacity 200 lbs
- Max allowable pull 3,500 lbs
- Weight 68 lbs
DICA Outrigger Pads – Tough – Guaranteed NOT To Break!
UEP offers a variety of bucket truck parts and accessories including DICA Outrigger Pads which are engineered to provide the perfect support base for your outrigger-equipped bucket trucks, aerial equipment, and cranes. Fabricated with durable thermoplastic materials capable of resisting warping or excessive bending, DICA Outrigger Pads are resistant to all forms of fluid and feature industrial-grade safety texturing capable of resisting slipping or sliding, even when the pad is laid in mud, water, or industrial lubricants. DICA Outrigger Pads are manufactured with TuffGrip handles designed to maintain a rigid shape to keep your workers safe and to make moving and set up quick and easy.
Dica Outrigger Pad Features:
- Durable thermoplastic material
- Resists warping & bending
- Resistant to fluids
- Industrial grade safety texturing resists slipping & sliding
- Tuff-Grip handles
Utility Equipment Parts carries the full line of tough, durable DICA Outrigger Pads, perfectly suited for almost any size outrigger foot and utility application. Fabricated with specialized thermoplastic and resistant to oil, liquids, and caustic agents, DICA 48482 Heavy-Duty Outrigger Pads provide the firm footing needed to keep your outrigger-footed utility rig and equipment safely planted firmly and safely on the ground. All DICA D2424 Medium Duty Outrigger Pads feature the DICA lifetime warranty, which states “If you break it, we’ll replace it. Guaranteed”.
DICA Safety Tech Outrigger Pads come in a wide variety of shapes and sizes, perfectly suited to many different environments and requirements. They provide a solid foundation for your equipment, reduce the chance of vehicle tip-over, and reduce the possibility of ergonomic injuries to operators. Dica Outrigger Pads can be custom designed to meet your needs – just about any size:
- Light duty … ¾” thickness
- Medium duty … 1” thickness
- Heavy duty … 2” thickness
Nylaflow tubing is the highest quality pressure tubing for hydraulic lines (1/4”) and air lines (1/8”) for utility trucks and digger derricks. UEP offers Type H tubing that is the stiffest of all nylons and ideal for carrying hydraulic oil and air for your unit. Properties of Type H Nylaflow tubing — 625 psi operating pressure; 2,500 psi bursting pressure. UEP always has a good supply of Nylaflow Type H tubing, priced less than other vendors.
Bucket/Utility Truck Lighting
Utility Equipment Parts is your best source for bucket truck lighting and other utility truck parts and accessories. Give Utility Equipment Parts a call today to learn more about our great pricing on bucket truck lights and other bucket truck and digger derrick parts and accessories.
Screw Anchor Wrenches and Accessories
Utility Equipment Parts offers parts to assemble your screw anchor wrench – Kelly bar adapter, locking dog assembly, and drive end. Depending on soil conditions, you may need an extension assembly as well. They come in 3.5 ft. and 7 ft. lengths.
A complete Screw Anchor Assembly consists of:
- Kelly Bar Adapter
- Square 2 1/2″ or 2 1/4″ or
- Hex 2″, 2 1/2″, 2 5/8″
- Locking Dog
- Drive End
The Kelly Bar Adapters feature a 5 1/4″ bolt circle. They include 6 ea. qty. 1/2″ bolts, nuts, and washers. The wrench is attached to the Kelly bar of your digger derrick via the Kelly bar adapter. The locking dog assembly holds the anchor rod in place. The Kelly bar adapter and locking dog assembly bolt together. If you’re installing screw anchors that require torques of up to 10,000 ft.-lbs, the Kelly bar adapter and locking dog assembly have six ½” bolt holes on a 5-1/4” bolt circle. For jobs that require installing torques up to 15,000 ft.-lbs, we offer larger Kelly bar adapters, locking dogs, and drive end assemblies.
If you have a Pengo utility auger on your digger derrick, we offer a tool that allows you to install anchors without having to remove the auger. It is the SAT-85 Screw Anchor Tool and works with Pengo dirt augers equipped with the FH-205 pilot. The SAT-85 just slips over the FH-205 pilot and you’re ready to install anchors.
Utility Equipment Parts is your best source for all screw anchor wrenches and other bucket truck parts and accessories. Give Utility Equipment Parts a call today to learn more about our pricing on screw anchor wrenches.
Contact us to place an order or if you don’t see the bucket truck part you need, we will get it for you!
- online form
Very simply, augers dig holes. There are many types available from hand-held devices for digging post holes to the gigantic foundation augers. The latter are as large as 96” in diameter. Today we’re going to focus on utility augers, e.g. the ones that attach to your digger derrick. There are many things to consider when […]
Whether you are stuck at home or trying to go away for a vacation, summertime is also a time for bad weather. Hurricanes, thunderstorms, and derechos can keep utility equipment operators busy no matter what is going on. Staying safe means never skipping your daily pre-operations check or knowing where the manual is … and much more.
Everyone knows that bucket truck operators are busy for days and have lots work to do after storms — repairing wires, fixing traffic lights, and trimming downed trees/limbs. There are two important pieces to staying safe on the job — having the right equipment, and knowing the proper procedures to act safely in an emergency.